BMW 1 Series E87 118d N47 2.0d 143bhp — Clutch Slave Cylinder / Concentric Bearing Leak
The concentric slave cylinder (CSC) inside the gearbox bellhousing fails, leaking hydraulic fluid and causing clutch failure.
Severity
SevereDIY Difficulty
Professional Only
Est. Cost
£400–£800
OBD Codes
None
Clutch
Typical layout and location for the Clutch assembly.
Symptoms
- Clutch pedal stays flat to the floor
- Difficulty engaging gears, especially 1st and Reverse
- Pool of brake fluid under the gearbox bellhousing
Root Cause
The seals inside the concentric slave cylinder wear out. Because it is mounted inside the bellhousing on the gearbox input shaft, the entire gearbox must be removed to replace a £40 part.
How To Fix
- Check brake/clutch fluid reservoir level (it will be low).
- Gearbox must be removed to access the CSC.
- Always replace the entire clutch kit at the same time, as the leaking fluid ruins the friction plate.
- Cost: £400-800
Estimated Repair Costs
| Repair Option | Est. Cost (GBP) |
|---|---|
| DIY (parts only) | £160–£320 |
| Independent Garage | £400–£800 |
| Main Dealership | £640–£1280 |
Other Faults on This Variant
Air Conditioning Condenser Leak (Stone Damage)
MinorThe air conditioning condenser is mounted at the very front of the cooling pack, making it highly susceptible to stone damage from the road, leading to refrigerant loss.
Front Anti-Roll Bar Drop Link Wear
MinorThe front anti-roll bar drop links wear out on heavily potholed UK roads, causing an annoying knocking sound at low speeds.
Alternator / Smart Charge System Failure
SevereModern vehicles use smart charging systems to reduce engine load, but the complex regulators on the alternators frequently fail.
Disclaimer: Repair cost estimates are indicative and based on community data. Always get a quote from a qualified mechanic before proceeding with any repair.