Kia Sportage Mk3 1.7 CRDi — Clutch Slave Cylinder / Concentric Bearing Leak
The concentric slave cylinder (CSC) inside the gearbox bellhousing fails, leaking hydraulic fluid and causing clutch failure.
Severity
SevereDIY Difficulty
Professional Only
Est. Cost
£400–£800
OBD Codes
None
Clutch
Typical layout and location for the Clutch assembly.
Symptoms
- Clutch pedal stays flat to the floor
- Difficulty engaging gears, especially 1st and Reverse
- Pool of brake fluid under the gearbox bellhousing
Root Cause
The seals inside the concentric slave cylinder wear out. Because it is mounted inside the bellhousing on the gearbox input shaft, the entire gearbox must be removed to replace a £40 part.
How To Fix
- Check brake/clutch fluid reservoir level (it will be low).
- Gearbox must be removed to access the CSC.
- Always replace the entire clutch kit at the same time, as the leaking fluid ruins the friction plate.
- Cost: £400-800
Estimated Repair Costs
| Repair Option | Est. Cost (GBP) |
|---|---|
| DIY (parts only) | £160–£320 |
| Independent Garage | £400–£800 |
| Main Dealership | £640–£1280 |
Other Faults on This Variant
Turbo Lag and Sticking VNT Actuator
ModerateOwners often complain of dangerous flat spots or severe turbo lag when pulling out of junctions. This is usually caused by a sticking turbo actuator.
Fuel Filter Housing Air Leak (Starting Issues)
ModerateA very common starting issue on the 1.7 CRDi in cold weather. The engine turns over endlessly but refuses to fire due to air entering the fuel system.
Air Conditioning Condenser Leak (Stone Damage)
MinorThe air conditioning condenser is mounted at the very front of the cooling pack, making it highly susceptible to stone damage from the road, leading to refrigerant loss.
Disclaimer: Repair cost estimates are indicative and based on community data. Always get a quote from a qualified mechanic before proceeding with any repair.