Renault Clio Mk3 1.5 dCi 86bhp — Clutch Slave Cylinder / Concentric Bearing Leak
The concentric slave cylinder (CSC) inside the gearbox bellhousing fails, leaking hydraulic fluid and causing clutch failure.
Severity
SevereDIY Difficulty
Professional Only
Est. Cost
£400–£800
OBD Codes
None
Clutch
Typical layout and location for the Clutch assembly.
Symptoms
- Clutch pedal stays flat to the floor
- Difficulty engaging gears, especially 1st and Reverse
- Pool of brake fluid under the gearbox bellhousing
Root Cause
The seals inside the concentric slave cylinder wear out. Because it is mounted inside the bellhousing on the gearbox input shaft, the entire gearbox must be removed to replace a £40 part.
How To Fix
- Check brake/clutch fluid reservoir level (it will be low).
- Gearbox must be removed to access the CSC.
- Always replace the entire clutch kit at the same time, as the leaking fluid ruins the friction plate.
- Cost: £400-800
Estimated Repair Costs
| Repair Option | Est. Cost (GBP) |
|---|---|
| DIY (parts only) | £160–£320 |
| Independent Garage | £400–£800 |
| Main Dealership | £640–£1280 |
Other Faults on This Variant
Injector Return Pipe Failure
SevereThe K9K 1.5 dCi in the Clio Mk3 has a known failure on the injector fuel return pipes. The plastic fittings crack and cause a fuel leak — a fire risk that must be addressed immediately.
EDC Automated Clutch Actuator Failure
SevereThe EDC (Easy Drive) semi-automatic gearbox variant of the 1.5 dCi Clio uses an electric clutch actuator. When this fails, the car refuses to move — and replacements are expensive.
Delphi Fuel Injector Failure
CriticalEarly 1.5 dCi engines (K9K) used Delphi fuel injectors that were highly prone to failure, causing misfires and sometimes producing metal swarf that destroys the entire fuel system.
Disclaimer: Repair cost estimates are indicative and based on community data. Always get a quote from a qualified mechanic before proceeding with any repair.