Renault Clio Mk3 1.5 dCi 86bhp — Starter Motor Solenoid / Brush Wear
The starter motor wears out internally. This is particularly common on vehicles equipped with Stop/Start systems.
Severity
SevereDIY Difficulty
Moderate
Est. Cost
£150–£350
OBD Codes
None
Symptoms
- A single loud 'click' when turning the key, but engine doesn't crank
- Engine cranks very slowly despite a fully charged battery
- Whirring or grinding noise after the engine starts
Root Cause
The carbon brushes inside the motor wear down to the copper wiring, or the contacts inside the solenoid burn out from repeated arcing.
How To Fix
- Confirm battery voltage is strong under load (to rule out a dead battery).
- Replace the starter motor unit.
- Ensure main earth straps from engine block to chassis are clean and tight.
- Cost: £150-350
Estimated Repair Costs
| Repair Option | Est. Cost (GBP) |
|---|---|
| DIY (parts only) | £60–£140 |
| Independent Garage | £150–£350 |
| Main Dealership | £240–£560 |
Other Faults on This Variant
Injector Return Pipe Failure
SevereThe K9K 1.5 dCi in the Clio Mk3 has a known failure on the injector fuel return pipes. The plastic fittings crack and cause a fuel leak — a fire risk that must be addressed immediately.
EDC Automated Clutch Actuator Failure
SevereThe EDC (Easy Drive) semi-automatic gearbox variant of the 1.5 dCi Clio uses an electric clutch actuator. When this fails, the car refuses to move — and replacements are expensive.
Delphi Fuel Injector Failure
CriticalEarly 1.5 dCi engines (K9K) used Delphi fuel injectors that were highly prone to failure, causing misfires and sometimes producing metal swarf that destroys the entire fuel system.
Disclaimer: Repair cost estimates are indicative and based on community data. Always get a quote from a qualified mechanic before proceeding with any repair.