MinorAffected: 2011-201860,000–120,000 miles

Ford Focus Mk3 1.0 EcoBoost 125bhp — Engine Thermostat Sticking Open

The engine coolant thermostat fails in the 'open' position. The engine never reaches its optimal operating temperature, killing fuel economy.

Severity

Minor

DIY Difficulty

Moderate

Est. Cost

£100–£250

OBD Codes

P0128

Component Diagram

Cooling

Typical layout and location for the Cooling assembly.

Reference Illustration

Symptoms

Temperature gauge drops when driving on the motorway
Heater blows lukewarm air in winter
MPG drops significantly
Engine takes a very long time to warm up

Root Cause

The wax element inside the thermostat degrades, or the return spring weakens, preventing the valve from closing off coolant flow to the radiator.

How To Fix

Scan for P0128 (Coolant Thermostat - Coolant Temp Below Regulating Temp).
Replace the thermostat housing unit and gasket.
Bleed the cooling system of air.
Cost: £100-250

Estimated Repair Costs

Repair Option	Est. Cost (GBP)
DIY (parts only)	£40–£100
Independent Garage	£100–£250
Main Dealership	£160–£400

Other Faults on This Variant

Timing Chain Stretch and Tensioner Failure

Critical

2011-201540,000–100,000 miles£600–£1200

The Focus Mk3 1.0 EcoBoost shares the same timing chain vulnerability as the Fiesta Mk7. Pre-2016 engines are the highest risk — chain rattle on cold start must be investigated immediately.

Coolant Loss from Integrated Exhaust Manifold

Severe

2011-201860,000–120,000 miles£500–£900

The 1.0 EcoBoost's unique integrated exhaust manifold/cylinder head design causes head gasket stress. Coolant loss without visible leaks is a known issue on higher-mileage Focus Mk3 examples.

Turbocharger Boost Leak from Intercooler Pipe

Moderate

2011-201850,000–120,000 miles£30–£150

Boost pressure leaks from the plastic intercooler pipes and clamp connections on the 1.0 EcoBoost are common. A leak causes a noticeable flat spot and loss of performance under boost.

Disclaimer: Repair cost estimates are indicative and based on community data. Always get a quote from a qualified mechanic before proceeding with any repair.