Mazda Mazda6 Mk2 2.2D — Engine Thermostat Sticking Open
The engine coolant thermostat fails in the 'open' position. The engine never reaches its optimal operating temperature, killing fuel economy.
Severity
MinorDIY Difficulty
Moderate
Est. Cost
£100–£250
OBD Codes
P0128Cooling
Typical layout and location for the Cooling assembly.
Symptoms
- Temperature gauge drops when driving on the motorway
- Heater blows lukewarm air in winter
- MPG drops significantly
- Engine takes a very long time to warm up
Root Cause
The wax element inside the thermostat degrades, or the return spring weakens, preventing the valve from closing off coolant flow to the radiator.
How To Fix
- Scan for P0128 (Coolant Thermostat - Coolant Temp Below Regulating Temp).
- Replace the thermostat housing unit and gasket.
- Bleed the cooling system of air.
- Cost: £100-250
Estimated Repair Costs
| Repair Option | Est. Cost (GBP) |
|---|---|
| DIY (parts only) | £40–£100 |
| Independent Garage | £100–£250 |
| Main Dealership | £160–£400 |
Other Faults on This Variant
Oil Pickup Strainer Blockage and Engine Seizure
CriticalA fatal flaw in the Mazda 2.2 MZR-CD engine. Injector seals leak, allowing carbon into the oil sump which blocks the oil pickup strainer. The engine then seizes from oil starvation.
Air Conditioning Condenser Leak (Stone Damage)
MinorThe air conditioning condenser is mounted at the very front of the cooling pack, making it highly susceptible to stone damage from the road, leading to refrigerant loss.
Front Anti-Roll Bar Drop Link Wear
MinorThe front anti-roll bar drop links wear out on heavily potholed UK roads, causing an annoying knocking sound at low speeds.
Disclaimer: Repair cost estimates are indicative and based on community data. Always get a quote from a qualified mechanic before proceeding with any repair.