Mini Hatch R56 Cooper S 1.6T 175bhp — Starter Motor Solenoid / Brush Wear
The starter motor wears out internally. This is particularly common on vehicles equipped with Stop/Start systems.
Severity
SevereDIY Difficulty
Moderate
Est. Cost
£150–£350
OBD Codes
None
Symptoms
- A single loud 'click' when turning the key, but engine doesn't crank
- Engine cranks very slowly despite a fully charged battery
- Whirring or grinding noise after the engine starts
Root Cause
The carbon brushes inside the motor wear down to the copper wiring, or the contacts inside the solenoid burn out from repeated arcing.
How To Fix
- Confirm battery voltage is strong under load (to rule out a dead battery).
- Replace the starter motor unit.
- Ensure main earth straps from engine block to chassis are clean and tight.
- Cost: £150-350
Estimated Repair Costs
| Repair Option | Est. Cost (GBP) |
|---|---|
| DIY (parts only) | £60–£140 |
| Independent Garage | £150–£350 |
| Main Dealership | £240–£560 |
Other Faults on This Variant
Timing Chain Tensioner Failure (N14 Engine)
CriticalThe BMW-designed N14 1.6T engine in the R56 Mini Cooper S has a plastic timing chain tensioner that fails prematurely. This is the most serious known fault on the R56 generation.
Carbon Build-Up on Intake Valves
ModerateThe N14's direct injection system means fuel is injected directly into the cylinder, bypassing the intake valves. Oil vapour from the PCV system coats the valves with carbon, causing power loss and misfires.
High Pressure Fuel Pump (HPFP) Failure
SevereThe High Pressure Fuel Pump on the N14 engine fails frequently. It is one of the most well-known and expensive failures on the R56 Cooper S.
Disclaimer: Repair cost estimates are indicative and based on community data. Always get a quote from a qualified mechanic before proceeding with any repair.